Huawei Cordless Telephone ETS8121 User Manual

ETS8121  
Cordless Phone  
 
Your Cordless Phone  
Earpiece  
Screen  
Headset Jack  
Navigation Key  
Left Soft Key  
Send Key  
Right Soft Key  
End/Power Key  
Number Keys  
# Key  
Key  
Microphone  
Charger Interface  
Note  
This is a sketch. Your cordless phone may be  
different. It is subject to your actual one.  
To achieve the optimal effect, use the cordless  
phone away from the charger stand.  
1
 
Keys and Functions  
Press…  
To…  
View the dialed calls in the standby mode.  
Make or answer a call.  
Power on the cordless phone by pressing and  
holding it.  
Power off the cordless phone by pressing and  
holding it in standby mode.  
End a call or reject an incoming call.  
Return to the home screen.  
Select the option displayed on the lower left  
corner of the screen.  
Select the option displayed on the lower right  
corner of the screen.  
In the standby mode, press Navigation key to  
access the shortcut screen.  
During a call, press left key or right key to  
adjust the volume of the earpiece.  
Enter numbers and characters.  
Number  
Keys  
Speed-dial cordless phone numbers in the  
standby mode (by pressing and holding the 1-9  
keys).  
Select a submenu item labeled with the  
corresponding number.  
Perform different operations for different  
functions of the cordless phone.  
*
key  
Unlock the keypad in the standby mode (by  
press Menu and then press * key).  
2
 
Press…  
key  
To…  
Perform different operations for different  
functions of the cordless phone.  
#
Lock the keypad in the standby mode (by  
pressing and holding it).  
Screen Icons  
Icon  
Description  
Icon  
Description  
Network signal strength  
Calling  
Battery power level  
Alarm clock is on  
Keypad is locked  
Message received  
Memory for messages  
is full, when the icon is  
blinking  
Remind by  
vibration  
Remind by sound /  
/
Without sound remind  
3
 
Menu Tree  
Messages  
Phone Book  
Call History  
1. Write  
1. Name List  
1. Missed Calls  
2. Inbox  
2. Add New  
2. Answered  
Calls  
3. Outbox  
4. Draft  
3. Speed Dials  
4. Memory Status  
3. Outgoing  
Calls  
5. VoiceMail  
6. Settings  
7. Memory Status  
Applications  
Phone  
Settings  
1. Alarm  
1. Profiles  
2. Call settings  
3. Time & Data  
4. Languages  
5. Network  
Service  
6. Security  
7. Version  
8. Key Guard  
9. Safe Code  
4
 
Installing the SIM Card and Battery  
Make sure that the golden area on the SIM card is facing  
downwards and the cut-off edge is correctly fit to that of the  
card holder.  
Charging the Battery  
1. Connect the cordless phone to the charger stand.  
2. Connect one power adapter connector to the charger stand.  
3. Connect the charger to an AC power socket. During the  
charging, the animation of charging icon is displayed.  
4. When the cordless phone is fully charged, disconnect the  
charger from the AC power socket first. Then disconnect the  
charger stand from the charger.  
5. When the charging icon becomes static, the cordless phone  
is fully charged.  
Note  
Remove the battery if the FWT is left unused for a  
long period.  
If the battery of your FWT has not been used for a  
long time or the battery is exhausted, the screen of  
the FWT may not function when you charge the  
battery again. This is normal. After the battery is  
being charged for a while, you can power on the FWT  
for use.  
5
 
Using the Function Menu  
1. In the standby mode, press  
interface.  
to display the Menu  
2. Press Up or Down key to scroll in the menu.  
3. Press  
to display the menu.  
4. Display the submenu in either of the ways:  
Press Up or Down key to scroll to a submenu item and  
press  
to select the submenu.  
Press the Number key corresponding to the number of a  
submenu to select it.  
5. Press  
to return to the previous menu or return to the  
to return to the home screen.  
home screen.  
6. Press  
Making a Call  
1. In the standby mode, enter a phone number.  
2. Press  
3. Press  
to dial the number.  
to end the call.  
6
 
Note  
When the cordless phone is locked, enter the lock  
code to unlock the cordless phone first; otherwise,  
you can only make emergency calls or answer calls.  
In the standby mode, press  
to view the  
dialed calls. Select a record and press  
dial this number.  
to  
Select a contact from the cordless phonebook and  
press to call this contact.  
During a call, press OK key to switch the Hands free.  
Answering a Call  
When there is an incoming call, you can press  
or  
to answer it, or press  
If the any-key answer function is enabled, you can press any  
key except and to answer an incoming call.  
to reject it.  
Cordless phone Lock  
The cordless phone lock protects your cordless phone from  
unauthorized use. The default cordless phone lock code is  
00000000. You can change it into any numeric string of 4 to 8  
digits.  
If the cordless phone lock is enabled, you need to enter the  
correct cordless phone lock code when you power on the  
cordless phone.  
PIN and PUK  
The personal identity number (PIN) protects your SIM card  
from unauthorized use. The PIN unblocking key (PUK) can  
7
 
unblock the blocked PIN. Both the PIN and PUK are delivered  
with the SIM card. For details, consult your service provider.  
Locking the Keypad  
In the standby mode, press and hold  
to lock the keypad.  
or to  
When the keypad is locked, you can press  
answer an incoming call or make emergency calls.  
You can press  
and  
to unlock the keypad.  
When the keyguard function is enabled, if there is no operation  
on the cordless phone for a preset period, the keypad is locked  
automatically.  
Changing the Text Input Modes  
The indicator of the current text input mode is displayed on the  
screen. In the editing mode, press  
mode.  
to change the input  
Note  
In the editing mode, press  
once to delete the  
letter on the left of the cursor. Press and hold  
to delete all the entered letters.  
In the "ABC", "Abc" or "abc" input mode, press  
once to enter a space, twice to enter "0".  
In the"ABC", "Abc" or "abc" input mode, press  
repeatedly to select and enter the commonly used  
punctuations.  
Entering English (ABC, Abc or abc)  
In the "ABC", "Abc" or "abc" input mode, you can press a key  
labeled with the desired letters once to enter the first letter on  
the key, twice to enter the second letter on the key, and so on.  
8
 
Note  
If the letter you want to enter is on the same key as  
the previous one, you can enter the latter one only  
after the cursor appears again or after you press the  
Right key to move the cursor to the next space.  
Entering Numbers  
1. In the "123" input mode, press a key labeled with the desired  
number.  
2. In the "ABC", "Abc" or "abc" input mode, press a key  
continuously or press and hold it until the desired number  
appears on the screen.  
Entering Symbols  
1. In any input mode, press  
to display a symbol list.  
2. Press Up or Down Key to select the desired symbol.  
3. Press the corresponding number key to enter the symbol.  
Warnings and Precautions  
This section contains important information pertaining to the operating instructions  
of your device. It also contains information about how to use the device safely.  
Read this information carefully before using your device.  
Electronic Device  
Power off your device if using the device is prohibited. Do not use the device when  
using the device causes danger or interference with electronic devices.  
Medical Device  
Follow rules and regulations set forth by hospitals and health care facilities. Do  
not use your device when using the device is prohibited.  
Pacemaker manufacturers recommend that a minimum distance of 15 cm be  
maintained between a device and a pacemaker to prevent potential  
interference with the pacemaker. If you are using a pacemaker, use the device  
on the opposite side of the pacemaker and do not carry the device in your front  
pocket.  
Some wireless devices may affect the performance of hearing aids. For any  
such problems, consult your service provider.  
9
 
Potentially Explosive Atmosphere  
Power off your device in any area with a potentially explosive atmosphere, and  
comply with all signs and instructions. Areas that may have potentially explosive  
atmospheres include the areas where you would normally be advised to turn off  
your vehicle engine. Triggering of sparks in such areas could cause an explosion  
or a fire, resulting in bodily injuries or even deaths. Do not power on your device at  
refueling points such as service stations. Comply with restrictions on the use of  
radio equipment in fuel depots, storage, and distribution areas, and chemical  
plants. In addition, adhere to restrictions in areas where blasting operations are in  
progress. Before using the device, watch out for areas that have potentially  
explosive atmospheres that are often, but not always, clearly marked. Such  
locations include areas below the deck on boats, chemical transfer or storage  
facilities, and areas where the air contains chemicals or particles such as grain,  
dust, or metal powders. Ask the manufacturers of vehicles using liquefied  
petroleum gas (such as propane or butane) whether this device can be safely used  
in their vicinity.  
Traffic Security  
Observe local laws and regulations while using the device. In addition, if using the  
device while driving a vehicle, comply with the following guidelines:  
Concentrate on driving. Your first responsibility is to drive safely.  
Do not talk on the device while driving. Use hands-free accessories.  
When you have to make or answer a call, park the vehicle at the road side  
before using your device.  
RF signals may affect electronic systems of motor vehicles. For more  
information, consult the vehicle manufacturer.  
In a motor vehicle, do not place the device over the air bag or in the air bag  
deployment area. Otherwise, the device may hurt you owing to the strong force  
when the air bag inflates.  
Do not use your device while flying in an aircraft. Power off your device before  
boarding an aircraft. Using wireless devices in an aircraft may cause danger to  
the operation of the aircraft and disrupt the wireless telephone network. It may  
also be considered illegal.  
Operating Environment  
Do not use or charge the device in dusty, damp, and dirty places or places with  
magnetic fields. Otherwise, it may result in a malfunction of the circuit.  
The device complies with the RF specifications when the device is used near  
your ear or at a distance of 1.5 cm from your body. Ensure that the device  
accessories such as a device case and a device holster are not composed of  
metal components. Keep your device 1.5 cm away from your body to meet the  
requirement earlier mentioned.  
10  
 
On a stormy day with thunder, do not use your device when it is being charged,  
to prevent any danger caused by lightning.  
When you are on a call, do not touch the antenna. Touching the antenna  
affects the call quality and results in increase in power consumption. As a  
result, the talk time and the standby time are reduced.  
While using the device, observe the local laws and regulations, and respect  
others' privacy and legal rights.  
Keep the ambient temperature between -10°C and 45°C while the device is  
being charged. Keep the ambient temperature between -10°C to 55°C for  
using the device powered by a battery.  
Prevention of Hearing Damage  
Using a headset at high volume can damage your  
hearing. To reduce the risk of damage to hearing, lower the headset volume to a  
safe and comfortable level.  
Safety of Children  
Comply with all precautions with regard to children's safety. Letting the child play  
with your device or its accessories, which may include parts that can be detached  
from the device, may be dangerous, as it may present a choking hazard. Ensure  
that small children are kept away from the device and accessories.  
Accessories  
Use the accessories delivered only by the manufacturer. Using accessories of  
other manufacturers or vendors with this device model may invalidate any  
approval or warranty applicable to the device, result in the non-operation of the  
device, and cause danger.  
Battery and Charger  
Unplug the charger from the electrical plug and the device when not in use.  
The battery can be charged and discharged hundreds of times before it  
eventually wears out. When the standby time and the talk time are shorter than  
the normal time, replace the battery.  
Use the AC power supply defined in the specifications of the charger. An  
improper power voltage may cause a fire or a malfunction of the charger.  
Do not connect two poles of the battery with conductors, such as metal  
materials, keys, or jewelries. Otherwise, the battery may be short-circuited and  
may cause injuries and burns on your body.  
Do not disassemble the battery or solder the battery poles. Otherwise, it may  
lead to electrolyte leakage, overheating, fire, or explosion.  
11  
 
If battery electrolyte leaks out, ensure that the electrolyte does not touch your  
skin and eyes. When the electrolyte touches your skin or splashes into your  
eyes, wash your eyes with clean water immediately and consult a doctor.  
If there is a case of battery deformation, color change, or abnormal heating  
while you charge or store the battery, remove the battery immediately and stop  
using it. Otherwise, it may lead to battery leakage, overheating, explosion, or  
fire.  
If the power cable is damaged (for example, the cord is exposed or broken), or  
the plug loosens, stop using the cable at once. Otherwise, it may lead to an  
electric shock, a short circuit of the charger, or a fire.  
Do not dispose of batteries in fire as they may explode. Batteries may also  
explode if damaged.  
Cleaning and Maintenance  
The device, battery, and charger are not water-resistant. Keep them dry.  
Protect the device, battery, and charger from water or vapor. Do not touch the  
device or the charger with a wet hand. Otherwise, it may lead to a short circuit,  
a malfunction of the device, and an electric shock to the user.  
Do not place your device, battery, and charger in places where they can get  
damaged because of collision. Otherwise, it may lead to battery leakage,  
device malfunction, overheating, fire, or explosion.  
Do not place magnetic storage media such as magnetic cards and floppy disks  
near the device. Radiation from the device may erase the information stored  
on them.  
Do not leave your device, battery, and charger in a place with an extreme high  
or low temperature. Otherwise, they may not function properly and may lead to  
a fire or an explosion. When the temperature is lower than 0°C, performance of  
the battery is affected.  
Do not place sharp metal objects such as pins near the earpiece. The earpiece  
may attract these objects and hurt you when you are using the device.  
Before you clean or maintain the device, power off the device and disconnect it  
from the charger.  
Do not use any chemical detergent, powder, or other chemical agents (such as  
alcohol and benzene) to clean the device and the charger. Otherwise, parts of  
the device may be damaged or a fire can be caused. You can clean the device  
and the charger with a piece of damp and soft antistatic cloth.  
Do not dismantle the device or accessories. Otherwise, the warranty on the  
device and accessories is invalid and the manufacturer is not liable to pay for  
the damage.  
Emergency Call  
You can use your device for emergency calls in the service area. The connection,  
however, cannot be guaranteed in all conditions. You should not rely solely on the  
device for essential communications.  
12  
 
Certification Information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Your device is a low-power radio transmitter and receiver. As recommended by  
international guidelines, the mobile device is designed not to exceed the limits for  
exposure to radio waves. These guidelines were developed by the independent  
scientific organization International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) and include safety measures designed to ensure safety for all  
users, regardless of age and health.  
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of  
radio frequency energy absorbed by the body when using a device. The SAR  
value is determined at the highest certified power level in laboratory conditions, but  
the actual SAR level of the device when being operated can be well below the  
value. This is because the device is designed to use the minimum power required  
to reach the network.  
The SAR limit also adopted by Europe is 2.0 W/kg averaged over 10 grams of  
tissue. The highest SAR value for this device type when tested at the ear is 1.2  
W/kg, and when properly worn on the body is 0.537 W/kg.  
Disposal and Recycling Information  
This symbol on the device (and any included batteries) indicates  
that they should not be disposed of as normal household  
garbage. Do not dispose of your device or batteries as unsorted  
municipal waste. The device (and any batteries) should be  
handed over to a certified collection point for recycling or proper  
disposal at the end of their life.  
For more detailed information about the recycling of the device  
or batteries, contact your local city office, the household waste  
disposal service, or the retail store where you purchased this  
device.  
The disposal of this device is subject to the Waste from Electrical and Electronic  
Equipment (WEEE) directive of the European Union. The reason for separating  
WEEE and batteries from other waste is to minimize the potential environmental  
impacts on human health of any hazardous substances that may be present.  
Reduction of Hazardous Substances  
This device is compliant with the EU Registration, Evaluation, Authorisation and  
Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of  
the European Parliament and of the Council) and the EU Restriction of Hazardous  
Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament  
and of the Council). For more information about the REACH compliance of the  
13  
 
recommended to visit the Web site regularly for up-to-date information.  
EU Regulatory Conformance  
Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance  
with the essential requirements and other relevant provisions of Directive  
1999/5/EC.  
For the declaration of conformity, visit the Web site  
Notice: Observe the national local regulations in the location where the device is to  
be used. This device may be restricted for use in some or all countries of  
European Union.  
Version: V100R001_01 Part Number: 31010ASC  
14  
 

Harbor Freight Tools Sander 69474 User Manual
Harbor Freight Tools Septic System Model 93819 User Manual
Hario Glass Home Theater Server BGSN 350U User Manual
Hasbro Motorized Toy Car 87862 User Manual
Hayter Mowers Lawn Mower 560F User Manual
Honeywell Thermostat B Q682 User Manual
Honeywell Water Heater B User Manual
HP Hewlett Packard Network Card EA833AA User Manual
HP Hewlett Packard Server 5971 0825 User Manual
Hunter Fan Thermostat 40020 User Manual